# # This is a sample configuration file for the ngIRCd IRC daemon, which must # be customized to the local preferences and needs. # # Comments are started with "#" or ";". # # A lot of configuration options in this file start with a ";". You have # to remove the ";" in front of each variable to actually set a value! # The disabled variables are shown with example values for completeness only # and the daemon is using compiled-in default settings. # # Use "ngircd --configtest" (see manual page ngircd(8)) to validate that the # server interprets the configuration file as expected! # # Please see ngircd.conf(5) for a complete list of configuration options # and their descriptions. # # The original can be found at: # /usr/share/doc/ngircd/sample-ngircd.conf.gz [Global] # The [Global] section of this file is used to define the main # configuration of the server, like the server name and the ports # on which the server should be listening. # These settings depend on your personal preferences, so you should # make sure that they correspond to your installation and setup! # Server name in the IRC network, must contain at least one dot # (".") and be unique in the IRC network. Required! Name = irc.example.net # Information about the server and the administrator, used by the # ADMIN command. Not required by server but by RFC! AdminInfo1 = Debian User AdminInfo2 = Debian City AdminEMail = irc@irc.example.com # Text file which contains the ngIRCd help text. This file is required # to display help texts when using the "HELP " command. ;HelpFile = /usr/share/doc/ngircd/Commands.txt # Info text of the server. This will be shown by WHOIS and # LINKS requests for example. Info = Yet another IRC Server running on Debian GNU/Linux # Comma separated list of IP addresses on which the server should # listen. Default values are: # "0.0.0.0" or (if compiled with IPv6 support) "::,0.0.0.0" # so the server listens on all IP addresses of the system by default. ;Listen = 127.0.0.1,192.168.0.1 # Text file with the "message of the day" (MOTD). This message will # be shown to all users connecting to the server: MotdFile = /etc/ngircd/ngircd.motd # A simple Phrase (<127 chars) if you don't want to use a motd file. ;MotdPhrase = "Hello. This is the Debian default MOTD sentence" # The name of the IRC network to which this server belongs. This name # is optional, should only contain ASCII characters, and can't contain # spaces. It is only used to inform clients. The default is empty, # so no network name is announced to clients. ;Network = aIRCnetwork # Global password for all users needed to connect to the server. # (Default: not set) ;Password = wealllikedebian # This tells ngIRCd to write its current process ID to a file. # Note that the pidfile is written AFTER chroot and switching the # user ID, e.g. the directory the pidfile resides in must be # writable by the ngIRCd user and exist in the chroot directory. # Keep this setting in sync with PIDFILE in /etc/init.d/ngircd PidFile = /var/run/ngircd/ngircd.pid # Ports on which the server should listen. There may be more than # one port, separated with ",". (Default: 6667) ;Ports = 6667, 6668, 6669 # Group ID under which the ngIRCd should run; you can use the name # of the group or the numerical ID. ATTENTION: For this to work the # server must have been started with root privileges! # Keep this setting in sync with DAEMONUSER in the init script and/or # the Group= setting in service file. ServerGID = irc # User ID under which the server should run; you can use the name # of the user or the numerical ID. ATTENTION: For this to work the # server must have been started with root privileges! In addition, # the configuration and MOTD files must be readable by this user, # otherwise RESTART and REHASH won't work! # Keep this setting in sync with DAEMONUSER in the init script and/or # the User= setting in service file. ServerUID = irc [Limits] # Define some limits and timeouts for this ngIRCd instance. Default # values should be safe, but it is wise to double-check :-) # The server tries every seconds to establish a link # to not yet (or no longer) connected servers. ConnectRetry = 60 # Number of seconds after which the whole daemon should shutdown when # no connections are left active after handling at least one client # (0: never, which is the default). # This can be useful for testing or when ngIRCd is started using # "socket activation" with systemd(8), for example. ;IdleTimeout = 0 # Maximum number of simultaneous in- and outbound connections the # server is allowed to accept (0: unlimited): MaxConnections = 500 # Maximum number of simultaneous connections from a single IP address # the server will accept (0: unlimited): MaxConnectionsIP = 10 # Maximum number of channels a user can be member of (0: no limit): MaxJoins = 10 # Maximum length of an user nickname (Default: 9, as in RFC 2812). # Please note that all servers in an IRC network MUST use the same # maximum nickname length! ;MaxNickLength = 9 # Maximum penalty time increase in seconds, per penalty event. Set to -1 # for no limit (the default), 0 to disable penalties altogether. The # daemon doesn't use penalty increases higher than 2 seconds during # normal operation, so values greater than 1 rarely make sense. ;MaxPenaltyTime = -1 # Maximum number of channels returned in response to a /list # command (0: unlimited): ;MaxListSize = 100 # After seconds of inactivity the server will send a # PING to the peer to test whether it is alive or not. PingTimeout = 120 # If a client fails to answer a PING with a PONG within # seconds, it will be disconnected by the server. PongTimeout = 20 [Options] # Optional features and configuration options to further tweak the # behavior of ngIRCd. If you want to get started quickly, you most # probably don't have to make changes here -- they are all optional. # List of allowed channel types (channel prefixes) for newly created # channels on the local server. By default, all supported channel # types are allowed. Set this variable to the empty string to disallow # creation of new channels by local clients at all. ;AllowedChannelTypes = #&+ # Are remote IRC operators allowed to control this server, e.g. # use commands like CONNECT, SQUIT, DIE, ...? ;AllowRemoteOper = no # A directory to chroot in when everything is initialized. It # doesn't need to be populated if ngIRCd is compiled as a static # binary. By default ngIRCd won't use the chroot() feature. # ATTENTION: For this to work the server must have been started # with root privileges! ;ChrootDir = /var/empty # Set this hostname for every client instead of the real one. # Use %x to add the hashed value of the original hostname. ;CloakHost = cloaked.host # Use this hostname for hostname cloaking on clients that have the # user mode "+x" set, instead of the name of the server. # Use %x to add the hashed value of the original hostname. ;CloakHostModeX = cloaked.user # The Salt for cloaked hostname hashing. When undefined a random # hash is generated after each server start. ;CloakHostSalt = abcdefghijklmnopqrstuvwxyz # Set every clients' user name to their nickname ;CloakUserToNick = yes # Try to connect to other IRC servers using IPv4 and IPv6, if possible. ;ConnectIPv6 = yes ;ConnectIPv4 = yes # Default user mode(s) to set on new local clients. Please note that # only modes can be set that the client could set using regular MODE # commands, you can't set "a" (away) for example! Default: none. ;DefaultUserModes = i # Do DNS lookups when a client connects to the server. ;DNS = yes # Do IDENT lookups if ngIRCd has been compiled with support for it. # Users identified using IDENT are registered without the "~" character # prepended to their user name. ;Ident = yes # Directory containing configuration snippets (*.conf), that should # be read in after parsing this configuration file. ;IncludeDir = /etc/ngircd/conf.d # Enhance user privacy slightly (useful for IRC server on TOR or I2P) # by censoring some information like idle time, logon time, etc. ;MorePrivacy = no # Normally ngIRCd doesn't send any messages to a client until it is # registered. Enable this option to let the daemon send "NOTICE *" # messages to clients while connecting. ;NoticeBeforeRegistration = no # Should IRC Operators be allowed to use the MODE command even if # they are not(!) channel-operators? OperCanUseMode = yes # Should IRC Operators get AutoOp (+o) in persistent (+P) channels? ;OperChanPAutoOp = yes # Mask IRC Operator mode requests as if they were coming from the # server? (This is a compatibility hack for ircd-irc2 servers) ;OperServerMode = no # Use PAM if ngIRCd has been compiled with support for it. # Users identified using PAM are registered without the "~" character # prepended to their user name. PAM = no # When PAM is enabled, all clients are required to be authenticated # using PAM; connecting to the server without successful PAM # authentication isn't possible. # If this option is set, clients not sending a password are still # allowed to connect: they won't become "identified" and keep the "~" # character prepended to their supplied user name. # Please note: To make some use of this behavior, it most probably # isn't useful to enable "Ident", "PAM" and "PAMIsOptional" at the # same time, because you wouldn't be able to distinguish between # Ident'ified and PAM-authenticated users: both don't have a "~" # character prepended to their respective user names! ;PAMIsOptional = no # When PAM is enabled, this value determines the used PAM # configuration. # This setting allows to run multiple ngIRCd instances with # different PAM configurations on each instance. # If you set it to "ngircd-foo", PAM will use # /etc/pam.d/ngircd-foo instead of the default # /etc/pam.d/ngircd. ;PAMServiceName = ngircd # Let ngIRCd send an "authentication PING" when a new client connects, # and register this client only after receiving the corresponding # "PONG" reply. ;RequireAuthPing = no # Silently drop all incoming CTCP requests. ;ScrubCTCP = no # Syslog "facility" to which ngIRCd should send log messages. # Possible values are system dependent, but most probably auth, daemon, # user and local1 through local7 are possible values; see syslog(3). # Default is "local5" for historical reasons, you probably want to # change this to "daemon", for example. SyslogFacility = local1 # Password required for using the WEBIRC command used by some # Web-to-IRC gateways. If not set/empty, the WEBIRC command can't # be used. (Default: not set) ;WebircPassword = xyz [SSL] # SSL-related configuration options. Please note that this section # is only available when ngIRCd is compiled with support for SSL! # So don't forget to remove the ";" above if this is the case ... # SSL Server Key Certificate ;CertFile = /etc/ssl/certs/server.crt # Select cipher suites allowed for SSL/TLS connections. This defaults # to HIGH:!aNULL:@STRENGTH (OpenSSL) or SECURE128 (GnuTLS). # See 'man 1ssl ciphers' (OpenSSL) or 'man 3 gnutls_priority_init' # (GnuTLS) for details. # For OpenSSL: ;CipherList = HIGH:!aNULL:@STRENGTH:!SSLv3 # For GnuTLS (this Debian package was linked against GnuTLS): CipherList = SECURE128:-VERS-SSL3.0 # Diffie-Hellman parameters ;DHFile = /etc/ngircd/dhparams.pem # SSL Server Key ;KeyFile = /etc/ssl/private/server.key # password to decrypt SSLKeyFile (OpenSSL only) # Note that this Debian package is linked against GnuTLS so this # option has no effect. ;KeyFilePassword = secret # Additional Listen Ports that expect SSL/TLS encrypted connections ;Ports = 6697, 9999 [Operator] # [Operator] sections are used to define IRC Operators. There may be # more than one [Operator] block, one for each local operator. # ID of the operator (may be different of the nickname) ;Name = TheOper # Password of the IRC operator ;Password = ThePwd # Optional Mask from which /OPER will be accepted ;Mask = *!ident@somewhere.example.com [Operator] # More [Operator] sections, if you like ... [Server] # Other servers are configured in [Server] sections. If you # configure a port for the connection, then this ngircd tries to # connect to the other server on the given port; if not it waits # for the other server to connect. # There may be more than one server block, one for each server. # # Server Groups: # The ngIRCd allows "server groups": You can assign an "ID" to every # server with which you want this ngIRCd to link. If a server of a # group won't answer, the ngIRCd tries to connect to the next server # in the given group. But the ngircd never tries to connect to two # servers with the same group ID. # IRC name of the remote server, must match the "Name" variable in # the [Global] section of the other server (when using ngIRCd). ;Name = irc2.example.net # Internet host name or IP address of the peer (only required when # this server should establish the connection). ;Host = connect-to-host.example.net # IP address to use as _source_ address for the connection. if # unspecified, ngircd will let the operating system pick an address. ;Bind = 10.0.0.1 # Port of the server to which the ngIRCd should connect. If you # assign no port the ngIRCd waits for incoming connections. ;Port = 6667 # Own password for the connection. This password has to be configured # as "PeerPassword" on the other server. ;MyPassword = MySecret # Foreign password for this connection. This password has to be # configured as "MyPassword" on the other server. ;PeerPassword = PeerSecret # Group of this server (optional) ;Group = 123 # Set the "Passive" option to "yes" if you don't want this ngIRCd to # connect to the configured peer (same as leaving the "Port" variable # empty). The advantage of this option is that you can actually # configure a port an use the IRC command CONNECT more easily to # manually connect this specific server later. ;Passive = no # Connect to the remote server using TLS/SSL (Default: false) ;SSLConnect = yes # Define a (case insensitive) list of masks matching nicknames that # should be treated as IRC services when introduced via this remote # server, separated by commas (","). # REGULAR SERVERS DON'T NEED this parameter, so leave it empty # (which is the default). # When you are connecting IRC services which mask as a IRC server # and which use "virtual users" to communicate with, for example # "NickServ" and "ChanServ", you should set this parameter to # something like "*Serv" or "NickServ,ChanServ,XyzServ". ;ServiceMask = *Serv,Global [Server] # More [Server] sections, if you like ... [Channel] # Pre-defined channels can be configured in [Channel] sections. # Such channels are created by the server when starting up and even # persist when there are no more members left. # Persistent channels are marked with the mode 'P', which can be set # and unset by IRC operators like other modes on the fly. # There may be more than one [Channel] block, one for each channel. # Name of the channel ;Name = #ngircd # Topic for this channel ;Topic = Our ngircd testing channel # Initial channel modes ;Modes = tnk # initial channel password (mode k) ;Key = Secret # Key file, syntax for each line: "::". # Default: none. ;KeyFile = /etc/ngircd/#chan.key # maximum users per channel (mode l) ;MaxUsers = 23 [Channel] # More [Channel] sections, if you like ... # -eof-